ON
OFF
When this option is set to OFF, the AUTOFEED signal on pin 14
is ignored and
(LF) command with each carriage return (CR). When AUTOFEED
is set to ON, a line feed is added to each carriage return the
printer receives. If your text lines overprint each other, you
need to set AUTOFEED to ON.
- 5
0
+ 5
This option sets
signal. Available settings are 0, -5, and +5 microseconds. For
most applications, leave this option set to 0 microseconds. The
factory setting is 0.
Before you can set options on
either
choose
RS-232C
communication.
RS232C
RS422
printer does not send an automatic line feed
the
delay period from the ACKNLG to the BUSY
the
or
RS-422
SERIAL submenus, you must
the
to match your interface
SelecType Options
may
SelecType
3 -27