Epson EPL-7000 User Manual page 206

4. To turn off the data dump mode and stop printing, press
to set the printer off line. (If you press
LINE
page is being printed, the green
page is ejected and the printer goes off line.) To exit the data
dump mode, turn off the printer or hold down the
button until INITIALIZE appears on
Look at sample data dump printout shown in Step 3. By
the
reading the characters printed in the text field on the right side of
the data dump printout or the printout of hexadecimal codes, you
can check what codes are being sent to the printer. In the text
field, printable characters appear as their true ASCII characters.
Non-printable codes, such as control codes, are represented by
dots.
For example, look at the first two hexadecimal codes on line 0004
of the printout sample (73 20). Code 73 represents the letter s;
code 20 represents a space. Check the fifth line of the text field
the right side of the printout and you will find the letter s
followed by a space.
The chart below interprets part of the first line of codes:
Hex codes
1B 52 10
1B4345
1B6B00
1B 70 00
Command
ESC R 10
ESC C
ESC k
ESC p
Using Data Dump Mode
light flashes until
ON LINE
display.
the
Select USA (symbol set) character set
Set page length
Select typeface
Turn proportional mode on/off
Troubleshooting
while a
ON LINE
RESET
Function
ON
the
on
7-49