Epson EPL-7000 User Manual page 53

Testing the Printer
Part of a typical pattern 1 test print is shown below:
After the page has been printed,
menu and
the
If you to print the second test print pattern, follow these
want
additional steps:
4. Press I,( once; then change
pressing
5. Press I,( to print the second pattern.
After you print the test pattern, press SelecType
SelecType mode.
If the test pattern prints correctly, you can skip to the section
connecting the printer to your computer later in this chapter. If
test print does not operate properly, see Chapter 7 for
troubleshooting information.
Testing and Connecting Your Printer
2-12
display shows TEST PRINT.
or once to display the following:
printer returns to the main
the
test pattern number by
the
exit
once to
on
the