Epson EPL-7000 User Manual page 46

SelecType
Other control panel features
Data dump
messages. If the
the corresponding error or status message on the
display and correct the problem as described in
Chapter 7.
— Cancels the remaining copies during
COPY END
multiple-copy printing. This button is effective
only the printer is off line.
when
— Cancels some settings made with
RESET
SelecType or software commands. When you hold
down this button for several seconds, 'RESET
appears on the display and all settings return to
their previously saved values. The page being
printed when this button is pressed is finished.
However, all remaining data is discarded. If you
press
o r
previous status without printing data.
If you continue to hold down this button after
RESET appears, INITIALIZE appears
display and the printer settings return to
power-on default settings.
Enters or exits SelecType mode. Press once to
enter Level 1; hold down to enter Level 2. When
you enter
each
light goes on. For a complete description of
SelecType, see Chapter 3.
Hold down
the
printer to turn on data dump (or hex dump)
mode. This feature allows advanced users to find
the cause of communication problems between the
computer and the printer. See Chapter 7.
Testing and Connecting Your Printer
light is flashing, read
CONTINUE
, the printer returns to its
level, the corresponding indicator
SelecType button while you turn on
The Control Panel
on the
the
2-5