Plugging In The Printer - Epson ColorPage EPL-C8200 Setup Manual

5

Plugging in the Printer

1. Check the label on the left side of the printer to make sure that
the voltage required by the printer matches that of the
electrical outlet it will be plugged into. Also, make sure that
you have the correct power cord for your power source.
c
2. Make sure that the printer is turned off. It is off when the N
side of the power switch on the left side of the printer is
pushed in.
3. Connect the power cord to the AC inlet on the left side of the
printer.
4. Plug the power cord into a properly grounded electrical
outlet.
Caution:
It is not possible to change the printer's voltage. If the
required voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.
Plugging in the Printer
47