Tv Controls - Sony WEGA KDS-R60XBR2 Operating Instructions Manual

Basic Operations
TV Controls
[] []
CHANNEL
VOLUME
_M
®
TV/VlDEO
POWE!_
LAMP ...............................
TIM
°%
...... ]
=[]
%
==
(o
o
[] TIMER LED When the timer is set, this LED will remain lit even if the TV is turned off. For details, see
page 61.
[] LAMP LED Blinks in red when the lamp for the light source has burned out. For details, see "Replacing the
Lamp" on page 66.
[] POWER LED Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see the contacting Sony information on page 2).
When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is
not securely attached (see page 68).
[] (IR)
Infrared Receives IR signals from the remote control.
Receiver Do not put anything near the sensor, as its function may be affected.
[] POWER Press to turn on and off the TV.
[] MENU Press to display MENU with TV functions and settings (see "Overview of MENU" on page 47).
[]
=I=
Press to cycle through the video inputs. If you set a certain input to
Skip
in Label Video
{
TV/VIDEO
Inputs,
then the input will not appear. For details, see page 60.
In the MENU screen, this button serves as confirming the selection or setting.
[] [] Press tO at(just the v°hnne" In the MENU screeu, ihese buttons serve as ieft!right buttons. ..........
VOLUME -/+
[] [] [] Press to scan through channels. To scan quickly through channels, press aud hold down either
CHANNEL -/+ -/+. In the MENU screen, these buttons serve as up/down buttons.
[] Speaker
Outputs the audio signal.
_ The CHANNEL + button has a tactile dot. Use it as a reference when
operating
the TV.
37