Tv Controls; For Kds-R60Xbr2 7 - Sony KDS-R60XBR2 Service Manual

TV Controls

Item Description
1 TIMER LED When the timer is set, this LED will remain lit even if the TV is turned off. For details, see
page 61.
2 LAMP LED
Blinks in red when the lamp for the light source has burned out. For details, see "Replacing the
Lamp" on page 66.
3 POWER LED
Lights up in green when the TV is turned on. If the LED blinks in red continuously, this may
indicate the display unit needs servicing (see the contacting Sony information on page 2).
When the red LED blinks only three times, the lamp door of the lamp unit or the lamp itself is
not securely attached (see page 68).
4 (IR) Infrared Receives IR signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Receiver
5 POWER
Press to turn on and off the TV.
6 MENU Press to display MENU with TV functions and settings (see "Overview of MENU" on page 47).
Press to cycle through the video inputs. If you set a certain input to Skip in Label Video
7
Inputs, then the input will not appear. For details, see page 60.
TV/VIDEO
In the MENU screen, this button serves as confirming the selection or setting.
Press to adjust the volume. In the MENU screen, these buttons serve as left/right buttons.
8
VOLUME –/+
9 Press to scan through channels. To scan quickly through channels, press and hold down either
–/+. In the MENU screen, these buttons serve as up/down buttons.
CHANNEL –/+
q; Speaker
Outputs the audio signal.
✍
For KDS-R60XBR2
POWER
POWER
TIMER LAMP
1 2 3 4 5
The CHANNEL + button has a tactile dot. Use it as a reference when operating
the TV.
0
CHANNEL
3
#
VOLUME
3
POWER
#
LAMP
TIMER
POWER
TIMER LAMP POWER
TV/VIDEO
MENU
Basic Operations
9
8
For KDS-R70XBR2
7
POWER
3
6
LAMP
2
TIMER
1
37