Sony WEGA KDS-R60XBR2 Operating Instructions Manual page 67

Other Information
Take tile new lamp out of tile box.
Do not touch the glass portion of the new lamp.
'/_ Do not shake the lamPl Vibrat on can damage the lamp or Shorten
its life.
'/,_ Avoid touching the front glass of a new lamp orthe glass of the
lamp receptacle, This may reduce picture quality or lamp life,
Remove tile outside lamp cover.
Release tile clamp as shown in tile illustration below.
Remove tile lamp door.
Turn tile screw counterclockwise, and then turn tile knob to tile left until
tile marks on tile lid and tile case line up. Remove tile door.
Pull out the lamp.
Hold the indents on the top and bottom of the lamp, as shown in the
illustration, and pull the lamp straight out.
part of the lamp
0
o
(Continued)
67