Programming The Remote Control - Sony WEGA KDS-R60XBR2 Operating Instructions Manual

Basic Operations
Programming the Remote Control
................... ................................. Tile remote control is preset to operate Sony brand video equipment.
BD/DVD 101 (Sony Bin-ray Disc Player)
DVR/VCR 901 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)
Follow the steps below to program your TV's remote control to operate non-
Sony video equipment.
Find the three-digit code for your equipment fiom the Manufacturer .'
_ " 'S
Codes" listed on page 33. If more than one code number is listed, tl-y
entering from the code listed first.
] SATiCABLE
Press and hold the _,........... _ or _ FUNCTION button you want to
program on the remote control and press the % button simultaneously.
The selected FUNCTION button (BD/DVD, DVR/VCR or
SAT/CABLE) will flash.
[] Within 10 seconds (while the FUNCTION button is lit), enter the three-
digit manufacturer's code number using the @-(_) buttons.
If the code is not entered within 10 seconds, you must start again from
step 1.
[] Press the @ button while the FUNCTION button is lit.
When the programming is correct, the selected FUNCTION button
blinks twice, and when not, blinks five times.
To check if the code works
Aim your TV's remote control at the equipment, and press the green
button. If you can turn the equipment on and off by using the remote control,
then the programming is complete. If not, try the next code listed.
32