Remote Control - Sony WEGA KDS-R60XBR2 Operating Instructions Manual

Remote Control
[] TVNIDEO Press repeatedly to cycle through the video inputs.
F_ S;e page 60Ior informaiion on seiiing upihe video
input labels, including the Skip function.
[] SLEEP
Press repeatedly until the TV displays the time in minutes
(Off,
t 5, 30, 45, 60, 90 or t 20) that you want the TV to remain on
before shutting off. To cancel Sleep, press SLEEP repeatedly
until Off appears.
[] FUNCTION The FUNCTION button indicator lights up nlomentarily when
Buttons pressed to show which external equipment the remote coutrol
is operating. When the remote control is set to operate the
external equipment, these buttons will operate the equipment
you choose. You must first press one of these FUNCTION
buttons to operate the corresponding equipment. See page 32
for programming the remote control.
[] 0 - 9, ENT Press 0-9 to select a chanuel; the chaunel changes after two
seconds. Press ENT to change channels immediately.
[] O Use with the 0-9 and ENT buttons to select digital channels.
For example, to enter 2.1, press @, O' (_) and ENT.
[]
JUMP Press to jump back and forth between two channels. The TV
alteruates between the current channel and the last channel that
was selected.
[] ANT Press to change between the VHF/UHF input and the CABLE
input.
[] SURROUND Press to select TruSurround XT audio effect or Off to turu this
feature off. See page 52.
[] SOUND Press to cycle through different sound settings:
Dynamic
for
enhanced treble and bass, Standard for spoken dialog and
Custom for flat setting.
The 5 button CH 4- button and PLAY button have a tactile dot. Use the tactile dot as a reference when
oPerating ihe TV.
/_ Insert two size AA (Re) batteries (supplied) by matching the _i
Push and
s de to open
and _ on the batteries to the diagram inside the remote control s
battery compartment. _ _ °
/,_ When you use the remote contro, point it at the infrared receiver.
See page 37 for the location of the infrared receiver.
28