Playing The Picture On A Tv - Sony Handycam DCR-HC62 Operating Manual

Playingthe pictureon a TV
You can connect your camcorder to the input jack of a TV or a VCR using the A/V connecting
cable ([_) or the A/V colmecting cable with S VIDEO ([_). Connect your camcorder to the
wall outlet (wall socket) using the supplied AC Adaptor lk_rthis operation (p. 121. Refer also
to the instruction mauuals supplied with the devices to be connected.
: Signal flow
Device without
an S VIDEO jack
IN
VIDEO
1®7
(Red)
Device with an
S VIDEO jack
IN S VIDEO
@
(Black)
VIDEO
@
(White)
_ ® ]
AUDIO
(Red) ]
Yellow)
VCR or TV
[] A/V connecting cable (supplied)
Connect 1o lhe input jack ol anolher de_ice.
[] A/V connecting cable with S
VIDEO (optional)
When connecting to another device via the S
VIDEO jack, by using the A/V connecling
cable wilh an S VIDEO cable, pictures can be
reproduced morc hulbfully than wilh lhe
supplied A/V cable connection.
Connect the white and rcd plugs (lel}/righl
audio) and S VIDEO plug (S VIDEO
cllannel) of an A/V connecling cable. In tills
case, the yellow (slandard video) plug
connectkm is not necessary. S VIDEO
conneclion only will nol oulput audio,
"_° Tips
• You can display the linle code on the TV scrcen
by scuing [DISP OUTPUT] to IV-OUT/
PANEL] lP. 52).
When connecting your camcorder to a
TV through a VCR
Connect your camcoMer to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1. VIDEO 2.
etc.), if the VCR has an input selector.
32