Table of Contents
Advertisement
INDEX SEARCH
The index signal is recorded on the tape automatically
when the recording is started. If you want to view a
recording at a specific start point, it can easily be done.
1 Press [SEARCH MODE] so that the Index Search
menu appears.
2 Enter your desired number by
pressing [PLAY] or [STOP] within 30
seconds.
3 Press [F.FWD] or [REW] to start
index search. If you want to go in
the forward direction, press [F.FWD].
If you want to go in the reverse
direction, press [REW].
• After index search, the VCR will play the tape
automatically.
It may be unlawful to record playback copyrighted
material without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette, remove its record
safety tab. To record on it later, cover
the hole with cellophane tape.
Before recording, make sure:
• The desired channel is selected by pressing [Number] on
the remote control or the [CHANNEL
connected the VCR to a cable box or
satellite box as in "VCR to TV connections" on page 3,
select the VCR to channel 3 or 4, the same channel as the
CH3 or CH4 switch on the back of the VCR. Then, select
the channel you want to record at the cable box or satellite
box. In this case, you can ONLY record and view the SAME
channel.)
• There is a tape with its safety tab into the VCR.
• The desired recording speed is selected in SP(standard
play) or SLP(super long play) mode by pressing [TAPE
SPEED] on the VCR.
Tape Speed
Type of tape
T60
SP mode
1hour
SLPmod
3hour
• TV STEREO or SAP is selected.
VIEWING AND RECORDING THE
SAME PROGRAM
1 Begin the recording by pressing [RECORD].
• To temporarily stop recording or resume it, press
[PAUSE/STILL]. After the VCR has been in Pause mode
for 5 minutes, it will stop automatically to protect the tape
and the video head from damage.
2 Press [STOP] when recording is completed.
VIEWING AND RECORDING DIFFERENT
PROGRAM
This is possible only if you have connected the TV as
shown in "VCR to TV connection using antenna cables" on
page 3, press the VCR/TV button to switch between VCR
and TV mode. VCR mode puts the output of the VCR
(tuned channels or cassette tape) to the ANT-OUT jack, to
be viewed by tuning the TV to CH3 or CH4, matching the
switch on the back of the unit. TV mode connects ANT-IN
directly to ANT-OUT, so all TV channels can be tuned
directly by the TV. This connection is also made
automatically when the unit is turned off.
OTR(One Touch Recording)
This feature allows you to set the recording length simply
by pressing [REC/OTR] on the VCR.
1 Begin OTR by pressing [REC/OTR] on the VCR
repeatedly until the desired recording length appears.
REC
OTR(0:30)
(Normal recording)
OTR(8:00)
INDEX SEARCH
03
RECORDING FUNCTION
Record safety tab
(
)
]. (If you
Recording/Playback Time
T120
T160
2hours
2-2/3hours
6hour
8hour
OTR(1:00).....
OTR(7:30)
TIME SEARCH
This feature allows you to fast forward or rewind the
tape for a desired length of time.
1 Press [SEARCH MODE] so that the Time Search
menu appears.
2 Enter your desired time to skip
by pressing [PLAY] or [STOP]
within 30 seconds.
3 Press [F.FWD] or [REW] to start
time search. If you want to go in
the forward direction, press
[F.FWD]. If you want to go in the
reverse direction, press [REW].
• After time search, the VCR will play the tape
automatically.
TIMER RECORDING
You may set the VCR to start recording while you are
away. You can set seven programs to record on specific
days, daily or weekly within a 1 year period.
1 Insert a tape with its safety tab into the VCR.
2 Select main menu by pressing [MENU].
3 Select "TIMER PROGRAMMING" by pressing [PLAY]
or [STOP]. Then, press [F.FWD].
• If you have not yet set the clock, "CLOCK SET"
appears. If so, follow the steps [3] and [4] in "CLOCK
SET UP" section. Then, set the timer recording.
4 Set the timer.
Set the program number (1~7)
Program number which is not set up flashes.
Press [PLAY] or [STOP] repeatedly for the
desired program number.Then, press [F.FWD].
Select once, daily or weekly recording
For once: Press [PLAY] or [STOP] to point to "ONCE".
For daily (Monday~Friday): Press [PLAY] or
[STOP] to point to "DAILY".
For weekly: Press [PLAY] or [STOP] to point to
"WEEKLY".
Then, press [F.FWD].
Set the date
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].
Set the start time
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD].
And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD].
Set the end time
Follow the instructions of "Set the start time" to set the end time.
Set the channel number
Press [PLAY] or [STOP] repeatedly for the desired channel number.
Then, press [F.FWD].
If you connected the VCR to a cable box or satellite box as in "VCR to TV
Connection" on page 3, select the VCR to channel 3 or 4, the same
channel as the CH3 or CH4 switch on the back of the VCR.
Then, select the channel you want to record at the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
Set the tape speed
Press [PLAY] or [STOP] repeatedly for the
desired tape speed.
Then, press [F.FWD].
• To go back one step, press [REW].
5 To set another program, repeat step [4]. To exit, press
[EXIT/RESET].
6 Press [POWER] to set the timer. The TIMER
indicator on the VCR comes on.
– 5 –
TIME SEARCH
2 : 50
PROGRAM NUMBER 4
DATE
- - / - -
START TIME - - : - -
- -
END
TIME - - : - -
- -
CHANNEL
- -
REC SPEED - -
PROGRAM NUMBER 4
ONCE
DAILY
WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE
05/13 MON
START TIME 07:30
PM
END
TIME 08:30
PM
CHANNEL
16
REC SPEED SP
SP
SLP
EN
Advertisement
Table of Contents
