Advertisement
CONNECTING AND OPERATING THE 1080P HDMI SCALER
1.
Connect the HDMI source to the 1080p HDMI Scaler using the supplied
HDMI cable.
2.
Connect an optional external audio source to either the TOSLINK digital audio
input or the stereo mini-jack input using user supplied cables.
1
: The 1080p HDMI Scaler will cross convert between some digital and
NOTE
audio formats. All audio outputs (HDMI, digital TOSLINK, and analog stereo
mini-jack) will be active. The 1080p HDMI Scaler will not, however, down-mix
multi-channel audio formats to 2 channel analog stereo. Please see the chart
below to see if audio will be heard out of a particular output based on the audio
input format.
HDMI
INPUT ►
MULTICHANNEL
OUTPUT ▼
LPCM
YES
HDMI
*2 CHANNEL
YES
TOSLINK
*2 CHANNEL
ANALOG
STEREO
NO
MINI-JACK
*2 channels are the front right and front left speakers. It will not down-mix multi-channel to 2 channel audio
3.
Connect the HDMI output on the 1080p HDMI Scaler to the display using the
supplied HDMI cable.
4.
Connect either the TOSLINK digital audio output or the stereo mini-jack analog
output to the display or external audio processor using user supplied cables.
5.
Plug the 5V DC power supply into the 1080p HDMI Scaler.
6.
Power on the display fi rst, then the source.
OPERATING THE 1080P HDMI SCALER
The 1080p HDMI Scaler has a built in GUI for navigating the various functions.
The GUI is navigated by the front panel buttons or the optional RMT-SR-IR
remote control (sold separately).
How to Connect the 1080p HDMI Scaler
HDMI
2 CHANNEL
DOLBY DIGITAL
LPCM
YES
YES
YES
HDMI
TOSLINK
2 CHANNEL
& DTS
LPCM
YES
YES
YES
YES
NO
YES
5
TOSLINK
ANALOG
DOLBY DIGITAL
STEREO
& DTS
2 CHANNEL
YES
YES
YES
YES
NO
YES
Advertisement
