Overview - Epson CBB Service Manual

EPSON Stylus COLOR 200 / EPSON Stylus 200

4.1 OVERVIEW

This section describes adjustments required when the printer is disassembled and assembled for repair.
After removing an ink cartridge, always install a new cartridge immediately.
During adjustments and testing, use cartridges designed exclusively for service :
Monochrome:1023206
CMY (Color):1029341
Service Performed
After replacing the M-4C11 printer mechanism.
After replacing the C199 MAIN board.
When vertical lines are not aligned.
When a white line appears after the printer
performs a single print pass.
After replacing or disassembling the carriage
unit.
When the printer indicates a Maintenance
Error.
After replacing the waste ink pad.
Rev. A
CAUTION
Table 4-1. Required Adjustments
Bi-D Alignment Adjustment (see 4.1.1)
1. EEPROM Reset (see 4.1.5)
2. Bi-D Alignment Adjustment (see 4.1.1)
1. Bi-D Alignment Adjustment (see 4.1.1)
2. Head Angle Adjustment (see 4.1.2)
Platen Gap Adjustment (see 4.1.4)
Maintenance Error Clear (see 4.1.5.4)
Maintenance Error Clear (see 4.1.5.4)
Adjustments
Adjustment Needed
4-1