Step 5: Electrical Connections; Step 6: Connect Power; Step 7: Assemble Burners, Check Ignition - GE Monogram ZGU365 Installation Instructions Manual

5
• Connect the 3-pin plastic plug from the
Step
Electrical
• Slide the metal cover over the connection
Connections
• Connect the 6-pin plastic plug from the
• Slide the metal cover over the connection
6
• Plug power cords into properly grounded
Step
Connect
Power
• Assemble burner as shown. Check to be sure
7
Step
Assemble
Burners,
Check
Ignition
Make sure slot in burner head
is positioned over electrode
12
blower/motor assembly to the 3-pin plastic
socket on the underside of the vent, next to
the conduit.
and secure with screws.
downdraft assembly to the 6-pin plastic
socket on the underside of the cooktop, next
to the power cord.
and secure with screws.
receptacle.
that burner heads are securely seated and
caps are positioned as shown.
Installation
G a s Downdraf t C ooktop
Service
Plate
Electrical
6-Pin
Supply Cord
Plug
Metal Cover
Medium Head
And Cap
Burner Grate
Medium Head
And Cap
• Check for proper ignition:
Burner Cap
–Push in one control knob and turn 90 to
HIGH position.
Burner Head
–The igniter will spark and the burner will
light; the igniter will cease sparking when
Burner Bowl
the burner is lit.
–First test may require some time, while air is
flushed out of the gas line.
Electrode
–Turn knob to OFF.
–Repeat the procedure for each burner.
Electrical
6-Pin Socket
Pressure
Test Point
Pressure
Regulator
Medium Head
And Cap
Small Head
And Cap
Large Head
And Cap
Front