Changing The Lower Thread Counter Setting - Brother HE-800B Instruction Manual

7-4. Changing the lower thread counter setting

If memory switch no. 302 is set to "1-BOBBIN", the lower thread counter will appear in the lower-right of the display during
automatic sewing mode.
If you use the lower thread counter to set the number of articles which can be sewn with the amount of lower thread available,
you can stop the lower thread running out in the middle of sewing.
・ The counter number will decrease by "1" for each pattern that is sewn.
・ When the counter value reaches "0", the buzzer will sound as a warning.
1
Switch the mode to automatic sewing mode.
4815M
2
While the sewing machine is at standby, hold down the ENTER key and press the ▼ key.
(The mode will switch to lower thread counter setting mode.)
4859M
3
Set the counting value (1).
4792M
4
Apply the changed setting.
4794M
NOTE:
If you press the AUTO key while the counter value (1) is flashing, the mode will return to automatic sewing mode and the
setting will not be changed.
<When the counter value has reached "0" and the buzzer has sounded>
1. Replace the lower thread.
2. Press the RESET key.
(The buzzer will stop and the counter value (1) for the lower thread counter will return to the value which has been set.)
7. USING THE SEWING MACHINE (OPERATION PANEL: ADVANCED OPERATION)
HE-800B
Lower thread counter
* When the counting value is changed, (1) will flash in
the display.
* Press the RESET key to return the value to what it
was before it was changed.
The mode will return to automatic sewing mode.
4858M
4929M
4930M
4862M
58