Installing The Flange Nut; Installing The Bed Base - Brother HE-800B Instruction Manual

3-3. Installing the flange nut

3-4. Installing the bed base

4737M
4069M
HE-800B
3. INSTALLATION
Install the four flange nuts (1) to the
underside of the work table.
1. Place the bed base (1) on top of the
work table, and insert the four
collars (2).
2. Provisionally tighten the four flange
nuts (4) onto the four bolts (3), and
then position the bed base (1).
3. Install the bed base (1) with the
three flat washers (5) and wood
screws (6), and then install the two
rubber caps (7).
4. Remove the four bolts (3).
5. Set the magnet (8) in the position
shown in the illustration.
6