Interface submenu options
The interface submenu is used to set options for the serial interface.
If you are using a serial interface, the options listed below should be
set
so that they match
BAUD RATE
PROT
DATA BIT
PARITY
STOP BIT
ROBUST-XON
Options for each menu function are described below. An asterisk (*)
is shown to
the
BAUD RATE = 9600*
This option sets the rate data is transferred from the computer to the
printer. The computer and printer must be set to the same baud rate.
PROT = RDY/BSY(H)*
This option sets printer's communication protocol. A communi-
cation protocol keeps the computer from sending more information
than the printer can handle. Most computers require RDY/BSY set
to high. The RDY/BSY option is also referred to as DTR POLARITY.
the requirements of your computer.
right of the factory default setting.
19200
9 6 0 0 "
4800
2400
1200
600
300
RDY/BSY(H)*
RDY/BSY(L)
XON/XOFF
Using the Printer
SelecType Options
3-25