Epson Action Laser Action Laser User Manual page 76

SelecType Options
STATUS PRT = OFF*
When this option is on, a status print test is run each time the printer
is powered on. See Chapter 2 for information on this print test.
POWER ON = ON LINE"
When this option is set to on line, the printer is set on line after you
turn on the printer. In
after you turn on the printer.
DATA BUFFER = 02*
This option sets
OVER LOAD = 10*
This option selects the printer's data buffer overflow value. The
options are percentages.
BUZZER = ON*
When this option is on, a buzzer sounds when a printer error occurs.
When the option is
3-22 Using the Printer
off line setting, the printer is set off
the
size of the data buffer in kilobytes.
the
off, the buzzer does not sound.
turned
ON
OFF*
ON LINE"
OFF LINE
01 through 99
01 through 40
ON*
OFF
line