Epson Action Laser Action Laser User Manual page 171

Problem
The LINE
ON
message appears but
nothing is printed
(continued).
The test prints do not
print.
The printer stops
printing and the
display reads
CHANGE DRUM,
TONER EMPTY,
PAPER EMPTY.
Solution
Your software may not be installed
properly for your printer. Make sure the
currently selected printer mode matches
your program's printer driver.
The printer must be set off line when
running a test print.
You may have installed an incompatible
font cartridge. Try the test print again
without the cartridge installed, or with a
different cartridge.
If the problem continues, service by an
authorized Epson Customer Care Center
is needed.
Replace the component specified. See
Chapter 4 for paper loading instructions.
See Chapter 6 for toner and drum
replacement instructions.
or
Printing Problems
Troubleshooting
7-15