Sending Mail - Casio PV-750 Plus User Manual

5. Tap the address you want to input.
• This inputs the address into the addressee field where the cursor is located.
• If the field where you are inputting the address already has an address in
it, the above step automatically inputs a comma at the current cursor
location and then inputs the newly selected address.
6. After you are finished, tap NEXT or tap another field on the screen.

Sending Mail

Use the following procedure to send all unsent mail messages currently on the
Outbox tab. Note that you can batch send all unsent messages or any single
message.
You can start a send operation from a variety of different screens, and the type of
screen currently on the display determines the type of send operation you can
perform.
Screen Type
Initial Mail Mode Screen
Action Menu
Mail Message Input Screen
Outbox Tab
Mail Message Display Screen
Important!
• An unsent message is one on the Outbox tab that has an asterisk (unsent
mark) to the left of its name.
• "(!)" indicates a message that was not sent properly for some reason.
• Sending a message does not remove it from the Outbox tab. It merely removes
the asterisk (unsent mark) to the left of the message. You must use the procedure
under "Deleting Data" on page 167 to delete messages from the Outbox tab.
106
All Unsent Messages
Yes
Yes
No
Yes
No
Single Message
No
No
Yes
Yes
Yes