Other Settings - Casio PV-750 Plus User Manual

POP Server*
This is an address of a server that you access to receive mail. Your provider
should tell you what address, if any, you need to input here.
Important!
• Some servers have separate POP and SMTP servers. In such a case,
input different addresses for SMTP Server and POP Server. See the
information you get from your service provider for what you need to
input.
DNS(1)*,
Your provider should give you one or two Internet Protocol (IP) addresses
for the domain name server. Input the address or addresses here.

Other Settings

Make the following settings as required.
IP Address
Input the IP Address for your PV Unit here. Your provider should tell you
what address you need to input here.
Address Bit Mask
Input the subnet mask if necessary. Your provider should tell you what data
you need to input here.
IP Header Compression
Use this setting to turn IP header compression on and off. IP header
compression should normally be turned on, unless instructed otherwise by
your service provider.
SMTP Port*
This setting should normally be left at its initial value of 25.
POP Port*
This setting should normally be left at its initial value of 110.
98
DNS(2)