Sending All Unsent Messages - Casio PV-750 Plus User Manual

• Outbox shows only the mail to be sent through the currently selected access
point. Mail to be sent through other access points is not shown.
• If you do not input your login password into the LOGIN PASSWORD field
when setting up your access point (page 97), the PV Unit will prompt you to
input it each time you try to send mail. When the password prompt appears,
input the correct login password and then tap the Set button in the toolbar. To
cancel the send operation, tap Esc.

Sending All Unsent Messages

You can send all unsent messages currently in the Outbox tab either by
using the Send button at the top of a screen or by tapping the Send button
on the initial Mail Mode screen.
• You can also sent all the unsent messages by tapping Send on the Action
Menu. Tapping Send & Receive on the Action Menu sends queued
messages and picks up any mail waiting on the server.
To send all unsent messages with the tool bar Send button
1. Tap the Send button in the tool bar at the top of the screen.
2. On the menu that appears, tap Send all.
3. In response to the confirmation message that appears, tap Yes to send all
unsent messages or No to abort the procedure without sending anything.
• If you tap Yes, the PV Unit initializes the modem, dials the number of
the currently selected access point, logs in to the host computer, sends
the mail messages, and then disconnects.
• Tapping Esc during the above sequence cancels the connection and send
operation.
To send all unsent messages from the Mail Mode initial screen
1. While the Mail Mode initial screen is on the display, tap the Send button.
2. In response to the confirmation message that appears, tap Yes to send all
unsent messages or No to abort the procedure without sending anything.
Chapter 8 E-Mail and SMS
107