To Make Communication Parameter Settings - Casio PV-750 Plus User Manual

4. Use an optional SB-90 9-9 pin connector to connect the PV Unit cradle
to the other unit's cable.
PV Unit

To make communication parameter settings

1. After connecting the two units, turn on the PV Unit.
2. Display the list view in a mode whose data can be received with this
setup.
• This configuration supports receipt of Contacts, Memo, Schedule and
To Do data.
• REMINDER 1, REMINDER 2, EXPENSE, CALENDAR, SKETCH,
and FREE FILE data cannot be received.
3. Tap the Menu Bar icon to display the menu bar, and then tap System –
Data communication.
4. Tap the button next to SF/CSF/NX.
5. Press the button next to Set up parameters and then tap Set.
Chapter 11 Data Communication
SF/CSF/NX Series Unit
Cradle
SB-90 9-9 pin connector
SB-90 3-9 pin cable
145