Still Images On A Memory Card - Canon ZR80 Instruction Manual

R_Qrding ,_mm _,Tag_ in _he Cam_de_
!! ,!!!i,i]]
1. Play back the tape.
2. Press the PHOTO button halfway when the scene you wish to record
appears.
• The camcorder pauses playback. The remaining image capacity and other information
appear.
• When you press the PHOTObutton on the wireless controller, recording starts
immediately.
3. Press the PHOTO button fully.
• The card access indicator flashes.
• You can also record a still image by pressing the PHOTO button fully when the tape is
in playback pause mode.
You can record images from devices connected via the S-video terminal (ZR90) or AV
terminal (analog line-in function), or via the DV terminal as still images on a memory
card. For connecting instructions, refer to page 36 and 80.
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure that the tape is stopped.
• When recording via the AV terminal, make sure that "AV ,,,I, D V' is displayed on the
screen. When recording via the DV terminal, make sure that "AV ,,,I, D V" is not
displayed. Change the setting as necessary([_[3 85).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the PHOTO button halfway when the scene you wish to record
appears.
• The still image, remaining image capacity and other information appear.
• When you press the PHOTObutton on the wireless controller, recording starts
immediately.
4. Press the PHOTO button fully.
The card access indicator flashes.
98