Canon ZR80 Instruction Manual page 102

R cording roo O_b _ide D _i_es
You can record movies from devices connected via the S-video terminal or AV terminal
(analog line-in function), or via the DV terminal on a memory card.
For connecting instructions, refer to page 36 and 80.
1. Set the camcorder to PLAY (VCR) mode.
• If a cassette is loaded, make sure the tape is stopped.
• When recording via the AV terminal, make sure that "AV _i_DV" is displayed on the
screen. When recording via the DV terminal, make sure that "AV ._DV" is not
displayed. Change the setting as necessary(L_3 85).
2. Connected device: Load a recorded cassette and play back the tape.
3. Press the start/stop button when the scene you wish to record appears.
4. Press the start/stop button to stop recording.
When recording from a tape in the camcorder or other video devices:
:9 A movie recorded from an image in 16:9 format will be vertically compressed.
:9 The data code of the movie will reflect the date and time it has been recorded
on the memory card.
:9 Recording stops at blank sections or recordings in different audio mode
(12bit!16bit).
S¢re,e Di _p !, a y du _,i,, ng M o_ ie Re co rd in g
_) "11_" Card Access Display
Indicates that the camcorder is writing
on ttle memory card.
{2) Movie recording time
Indicates the recording time of the movie.
C_) Image Size
nd cates the mov e sze.
C_) Rema n ng Card Capac ty for
Movies
Indicates the remaining time in hours
and minutes. At less than 1 minute, the
remaining time will be displayed in 10
second-steps, at less than 10 seconds in
second-steps.
• The indication varies depending on
the recording condition. The actual
remaining time may be longer or
shorter than indicated.
102