Using
the Wireless
Controller
Point it at the camcorder's
remote
sensor
when
you press the buttons.
Inserting
Batteries
The wireless controller operates with two AA (R6) batteries.
1. Open the battery
cover.
2. Insert
the batteries
following
the +
and - markings.
Replace both batteries.
3. Close the battery
cover.
0 Camcorder and wireless controller are equipped with 2 remote sensor modes
(_
77). If the wireless controller does not work, check if camcorder and
wireless controller are set to the same mode.
:b The wireless controller may not work properly when the remote sensor is
subjected to strong light sources or direct sunlight.
2O