Adjusting The Focus Manually - Canon ZR80 Instruction Manual

Adjusting the Focus Manually
Autofocus may not work well on the following subjects. In such case, focus manually.
Subjects with
Reflective surfaces low contrast or Fast Moving Subjects Through dirty or
wet windows
without vertical lines
FOCUS butto_ __ .......................... Zoom lever
.............. Program selector
........................................... SET dial
ii i!ii
1. Set the program selector to _.
,b
2. Adjust the zoom.
When you operate the zoom after adjusting the focus, the
subject may not stay in focus. Adjust tiqe zoom before the focus.
3. Press the FOCUS button.
"MF" appears.
4. Turn the SET dial to adjust the focus.
• Turn the SETdial up or down until tl_e image appears focused.
• Pressthe FOCUS button to return to autofocus.
52