Canon ZR80 Instruction Manual page 132

_ MemQ_y Card Re!a_ed Messoges
Message Explanation L_
NO CARD Memory card not is inserted into the camcorder. 92
THE CARD IS SET FOR SD Memory Card is set for erasure prevention. Replace the 92
ERASURE PREVENTION card or change the position of the protect switch.
NO IMAGES No images are recorded on the memory card. -
CARD ERROR A memory card error occurred. The camcorder cannot record -
or play back the image.
The error may be temporary. If the message disappears after
4 seconds and r-dflashes red, turn the camcorder off, remove
the card and reinsert the card. Ifr-d changes to green, you
can continue recording/playback.
CARD FULL No remaining capacity on the memory card. Replace with -
another card or erase images.
NAMING ERROR File or folder number has reached the maximum value. 95
UNIDENTIFIABLE Image is recorded in a not compatible JPEG format or -
IMAGE another format not compatible with the camcorder, or the
image file is corrupted.
i_PRINT ORDER You attempted to set more than 200 still images in the print 126
ERROR order.
THIS IMAGE CANNOT Some analog images cannot be recorded on the memory
BE RECORDED card depending on the signal.
THIS IMAGE CANNOT You attempted to use an image recorded with another 119
BE USED AS START-UP camcorder, recorded in a format not compatible with this
IMAGE camcorder, or that has been edited on a computer.
132