6. At the Add Printer dialog box, click both
Otherwise, your printer may output pages of code. Give the
Stylus RIP printer a descriptive name to differentiate it
from the standard driver. Then click
Give the RIP
printer driver a
Do not make your
printer the default
Do not print
the test page
7. At the printer properties dialog box, click
8. Once the PostScript driver is installed, the Setup program asks
if you want to add another PostScript printer to your system.
9. When you see a message that installation is complete, click
to close the Setup program and restart the system
Once the system restarts, the EPSON Stylus RIP software and
PostScript driver are successfully installed. If you aren't printing
in a networked environment, you can jump ahead to Chapter 4
to begin printing with EPSON Stylus RIP.
Installing EPSON Stylus RIP for Windows
button to stop adding PostScript drivers.
to accept the