Printing With Epson Stylus Rip For Windows; Printing From An Application - Epson 7500 User Manual

4
RIP for Windows
Once you've installed the EPSON Stylus RIP software on your
computer(s), you're ready to print in PostScript. To print with
the EPSON Stylus RIP, you need to start the RIP, set printing
options, print from your application, and let the RIP process
send it to your printer. You can then use the EPSON Stylus RIP
window to monitor your print jobs, manage the print queue, or
run a batch of print jobs at the same time.
Here's what this chapter covers:
Printing from a Windows application and setting printer
and output options
Managing print jobs
Network printing
Configuring the EPSON Stylus RIP application

Printing from an Application

When you want to print PostScript documents, you must first
start the EPSON Stylus RIP software. Then you print via the
PostScript driver, which automatically stores your print job as a
file on your hard disk. The RIP then automatically processes
the print job and sends it to your printer.
Printing with
EPSON Stylus
4-1