Canon VIXIA HFM300 Instruction Manual page 54

[Memery Jure]-" D isplays a screen where you can verify how much of the
built-in memory (lflil_ile;t_ only) or the memory card is currently in use
(li] total recording time and [] total number of photos) and how much
space remains available for recording.
• Estimated figures about available movie recording time and available
number of photos are approximate and based on the recording mode
and photo quality/size settings currently in use.
• In the information screen of a memory card you can also check its
Speed Class.
• _ The [Total space] shown for the built-in memory indicates
actually usable space. It may be slightly smaller than the nominal built-in
memory capacity listed in the Specifications.
[x,voCuJur]: Uses a color space with an extended gamut to achieve
deeper colors, closer to real life.
• Use this function to record video only when you intend to play back your
recordings on an HDTV compatible with x.v.Color, connected to the
camcorder using an HDM] cable. If recordings made with x.v.Oolor are
played back on a non-compatible q-V,colors may not be reproduced
correctly.
[Auto Rutate]-" Photos that were recorded in portrait orientation (by turning
the camcorder on its side), will be rotated automatically and displayed
correctly during playback.
[Phutu Review Time]-" Selects the time to display a photo after it has been
recorded.
• The review time can only be set when the drive mode is set to
[I--I Single].
[Phutu Numburiugl-" Select the photo numbering method to be used on a
new memory card. Photos are automatically assigned consecutive num-
bers from 0101 to 9900, and stored in folders containing up to 100 pho-
tos. Folders are numbered from 101 to 998.
[l'gk'l Reset]: Photo numbers will restart from 101-0101 every time you
insert a new memory card.
[_ Continuous]: Photo numbers will continue from the number following
that of the last photo recorded with the camcorder.
• If the memory card you insert already contains a photo with a larger
number, a new photo will be assigned a number one higher than that of
the last photo on the memory card.
• We recommend using the [_ Continuous] setting.
156 • Additional Hnformat[on