Canon VIXIA HFM300 Instruction Manual page 31

• When the last disc is finalized, [Task completed] will be displayed.
Take out the disc and close the disc tray.
When the data requires multiple discs
After a disc is finalized, it will be ejected automatically and a message
will appear. Insert the next disc and close the disc tray.
To create an additional copy of the same disc
After the operation is finished, insert a brand new disc, close the disc
tray and repeat the operation.
O JMPORTANT
• AVCHD discs created with the optional DW-100 DVD Burner cannot
contain scenes recorded in MXP mode. Use the supplied software
ImageMixer 3 SE to save such scenes.
• While the camcorder is connected to the DVD Burner, do not open the
memory card slot cover and do not remove the memory card.
• Observe the following precautions while the ACCESS indicator on the
camcorder is on or flashing. Failing to do so may result in permanent
data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the compact power adapter or turn off the
camcorder or the DVD Burner.
• For important information on handling your discs, refer to DW-1001Cau-
tions on handling.
(_ NOTES
• If a scene does not fit entirely in one disc, it may be divided and con-
tinue on the next disc.
• When the camcorder contains a large number of scenes to be saved on
discs, it may take a long time for the connection to the DVD Burner
(step 2 above) to be completed. For best performance, we recommend
limiting the number of scenes to be saved to 500 or fewer scenes. (With
500 scenes, it will take approximately 3 minutes to complete the con-
nection.)
External Connections *
133