Canon VIXIA HFM300 Instruction Manual page 34

Operating modes: 1
Converting Scenes into Standard Definition
1 Power the camcorder using the compact power adapter.
2 Make sure there is a memory card in the camcorder with sufficient
available space.
3 Open the [Original], [Playlist] or [Video Snapshot] --> [Original]/
[Playlist] index screen.
• Check that you have selected the [_ tab (built-in memory).
• [Original] or [Video Snapshot] --> [Original] index screen: To convert all
the scenes recorded on a specific date, narrow down the scenes
shown to scenes recorded on that date ([_ 55).
4 Touch [_] to open the scene selection screen.
When you convert scenes from the [Playlist] index screen (including the
playlist of video snapshot scenes), you cannot select individual scenes;
instead, the entire playlist will be converted. Skip directly to step 6.
5 Touch on the individual scenes you want to convert.
• A checkmark -/ will appear on scenes selected. Touch a selected
scene again to remove the checkmark.
• To select all the scenes at once: Touch [Select All] instead of
touching individual scenes. (Remove in advance any checkmarks
from scenes you may have selected individually.)
6 Touch [Edit] _} [Convert HD.I_SD (0 DVD)] to open the HD.I_SD
conversion screen.
• If a copyright notice appears, read it carefully and touch [OK] if you
agree.
• touch err] to change the conversion settings as described below.
7 Touch [Yes] _} [OK].
Touch JR] to interrupt the operation while it is in progress.
To embed the recording date and time
The recording date and time will always be displayed on the converted
scene.
[_]_ [embed Date/Time] _ [0n] _ [2::3] _[_]
1:36* ExternalConnections