Department Code; Distinguish Thin Lines; Toner Save - Toshiba e-STUDIO 2330c Printing Manual

4.PRINTING FROM UNIX

Department Code

The department access code can be set using the following option.
Option Value Alternate Value
dept=code
How the equipment performs printing for an invalid department code print job, for which an invalid department code is
specified, varies depending on the Department Code Enforcement setting that can be set from TopAccess
Administrator mode. When the Department Code Enforcement is set to "ON", the invalid department code print job will
be stored in the invalid department code print job list without printing. When the Department Code Enforcement is set
to "Print", the invalid department code print job will be printed. When the Department Code Enforcement is set to
"Delete", the invalid department code print job will be deleted without printing.
Smoothing
The smoothing mode can be set using the following option.
Option Value Alternate Value
smoothing=on ON
smoothing=off OFF
Example: The command to set the smoothing mode is "lp -o smoothing=on filename".

Distinguish Thin Lines

The thin line limit mode can be set using the following option.
Option Value Alternate Value
thinlinelimit=on ON
thinlinelimit=off OFF
Example: The command to set the thin line limit mode is
"lp -o thinlinelimit=on filename".
Do not Print Blank Pages
The blank page mode can be selected using the following option.
Option Value Alternate Value
blankpage=0
blankpage=1
Example: The command to set the blank page mode is
"lp -o blankpage= filename".
0

Toner Save

The toner save mode can be set using the following option.
Option Value Alternate Value
tonersave=on ON
tonersave=off OFF
Example: The command to set the toner save mode is "lp -o tonersave=on filename".
Description
Set the department access code. The code is a 5-digit
numeric value.
Description
Set the smoothing mode.
Cancel the smoothing mode.
Description
Set the thin line limit mode.
Cancel the thin line limit mode.
Description
Set the blank page mode (disable Do not Print Blank
Pages).
Cancel the blank page mode (enable Do not Print Blank
Pages).
Description
Set the toner save mode.
Cancel the toner save mode.
4 PRINTING FROM UNIX
Printing from an Application 129