Toshiba e-STUDIO 2330c Printing Manual page 45

2.PRINTING FROM WINDOWS
Setting: Image Attribute Tab
In the Image Attribute tab of the Setting dialog box, you can specify the following functions. Adjust the density level by
moving the scroll bar, or pressing buttons on the right and left of the scroll bar.
1
2
3
4
5
6
1) Contrast
Adjust the contrast for printing. You can set from -4 (lowest) to 4 (highest) in units of 1 by moving the scroll bar.
2) Brightness
Adjust the brightness for printing. You can set from -4 (darkest) to 4 (lightest) in units of 1 by moving the scroll bar.
3) Background Adjustment
Adjust the background adjustment for printing. You can set from -4 (lightest) to 4 (darkest) in units of 1 by moving the
scroll bar.
4) Saturation
Adjust the saturation for printing. You can set from -4 (low clear) to 4 (high clear) in units of 1 by moving the scroll bar.
5) Use Sharpness Filter
Check this box when you use a sharpness filter. You can set from -4 (softest) to 4 (sharpest) in units of 1 by moving the
scroll bar..
6) [Restore Defaults]
Click this to restore all the image quality setting details displayed in the Image Attribute tab menu to the original factory
defaults.
2 PRINTING FROM WINDOWS
Setting Up Print Options 43