Image Quality Type; Black Over Print; Color Balance - Toshiba e-STUDIO 2330c Printing Manual

4 PRINTING FROM UNIX

Image Quality Type

The Image Quality Type can be selected using the following options.
Option Value Alternate Value
iqnormal
iqphoto
iqpresen
iqlineart
Example: The command to set the normal quality type for the print job is
"lp -o iqnormal filename"
Halftone
The halftone can be selected using the following options.
Option Value Alternate Value
halftone=AUTO
halftone=DETAIL
halftone=
SMOOTH
Example: The command to set the auto halftone for the print job is
"lp -o halftone=AUTO filename"

Black Over Print

The black over print mode can be selected using the following options.
Option Value Alternate Value
blackoverprint=0
blackoverprint=1
Example: The command to set the black over print mode for the print job is
"lp -o blackoverprint=1 filename"

Color Balance

The Color Balance can be selected using the following options.
Option Value Alternate Value
CBC=value
CBM=value
CBY=value
CBK=value
Example: The command to set "1" to the color balance for black toner for the print job is
"lp -o CBK=1 filename"
134 Printing from an Application
Description
Set the proper image quality for printing a general color
document.
Set the proper image quality for printing photos.
Set the proper image quality for printing a vivid
document.
Set the proper image quality for printing a document
containg a lot of characters or line arts.
Description
Set the proper halftone depending on the contents in
the document automatically.
Set the halftone in detail.
Set the halftone smoothly.
Description
Disable the black over print mode.
Enable the black over print mode.
Description
Specify the color density of cyan toner. You can specify
the following values:
-4. -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density of magenta toner. You can
specify the following values:
-4. -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density of yellow toner. You can
specify the following values:
-4. -3, -2, -1, 0, 1, 2, 3, 4
Specify the color density of black toner. You can
specify the following values:
-4. -3, -2, -1, 0, 1, 2, 3, 4