Table of Contents
Advertisement
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL & LED DISPLAY
BUCKET FULL LIGHT
REMOTE RECEIVER
MODE BUTTON
CONTROL PANEL OPERATING INSTRUCTIONS
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Cool
, Dry, and Fan only mode. Each press of the MODE button will light up a different icon on
the control panel. The exhaust hose and window kit must be installed when the unit is in Cool or
Dry mode. When using the unit as a fan, it is not necessary to keep the exhaust hose and window
kit connected to the unit.
Temperature - Select the desired temperature by pressing either
3)
cooling mode.
Louver Direction - This unit has 4-Way directional louvers. Use the louver guides to direct air where
4)
cooling or fanning is needed most.
5)
Bucket Full - When the unit cannot evaporate the collected moisture fast enough. The excess water will
collect in a backup water tank located inside the unit. The bucket full icon will light up if this occurs
8
COOL MODE LIGHT
LED DISPLAY
TEMP SELECT BUTTON
DRY MODE LIGHT
FAN MODE LIGHT
POWER BUTTON
+
-
or
key when using the unit in
Hide quick links:
Advertisement
Table of Contents
