Control Panel Buttons; Control Panel, Display, & Operating Instructions - Soleus Air TM-PAC-08E3 Operating Instructions Manual

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL
Airflow
Auto-Swing
Button
Mode Selection
Button
OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air
Conditioner mode, Dehumidifier mode, Fan only mode, and Auto mode. Each press of the MODE but-
ton will light up a different icon on the control panel. The exhaust hose and window kit must be in-
stalled when the unit is in Air Conditioner, Dehumidifier mode, and Auto mode. When using the unit as
a fan, it is not necessary to keep the exhaust hose and window kit connected to the unit.
Temperature - Select the desired temperature by pressing either ▲ or ▼ key when using the unit in
3)
Air Conditioner mode. The temperature indicator flashes to display the desired temperature setting. Af-
ter the temperature is set, the unit will display this temperature setting until it is changed by the user.
The temperature indicator display shows temperature in Fahrenheit. Press and hold the Mode button for
20 seconds to switch between Celsius and Fahrenheit.
4) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water
will collect in a backup water tank located inside the unit. The control panel will display "Ft" (Full
Tank) if this occurs.
5) Louver Direction - This unit has 4-way directional louvers. Use the louver guides manually to direct
air up and down. To direct air left and right, press the Auto-Swing Button for automatic comfort.
Fan Mode
Indicator
Decrease
Temperature
Button
Dehumidifier Air Conditioner
Mode
Indicator
Sleep Mode
Indicator
Auto
Fan Speed
Mode
Indicator
Indicator
Mode
Indicator
10
POWER
Increase
ON/OFF
Temperature
Button
Fan Mode
Button
Button