For Example
The default setting for the zero character is slashed. To change the
setting to unslashed:
1. Press and hold
The following line prints:
Printer Control Emulation Mode
2. Press
LINE FEED
appears:
Symbol Sets
3. Press
FORM FEED
appears:
Symbol Sets
4. Press
TOF SET
The following line prints:
Symbol Sets
5. Press
PITCH
Menu Mode.
while turning the printer on.
SELECT
several times until the Symbol Sets group line
Character Set
repetitively until the Zero Character item line
Zero Character
once.
Zero Character
and
together to save the setting and exit the
MODE
45
• Operating Your Printer
IBM
SetI
Slashed
Unslashed