Testing Your Printer - Oki 188 User Manual

9. Push back the bail arm lever, ensuring that the paper has been
positioned correctly.
10.Press
SELECT

Testing Your Printer

Your printer has a built-in test (self test) to make sure that it is set
up and working correctly.
1. Load continuous forms paper into the printer (see page 14, ff.).
2. Make sure the printer is turned off, then press and hold
while turning the printer on.
FEED
The test print begins.
3. To stop the test, press
The top of each test printout contains information about your
printer. Be sure to have a copy of the printout handy if you
have to call for service.
to place the printer on line.
SELECT
Important
29
• Setting Up Your Printer
or turn the printer off.
LINE