Lenovo ThinkServer TD200x Installation And User Manual page 98

v For a list of supported optional devices for the server, see
v Inspect the drive and drive bay for signs of damage.
v Make sure that the drive is correctly installed in the drive bay.
v See the documentation for the ServeRAID controller for instructions for installing
v All hot-swap drives in the server must have the same throughput speed rating;
v You do not have to turn off the server to install hot-swap drives in the hot-swap
v The drive ID for each hot-swap hard disk drive is printed above the drive bay.
82
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Installation and User Guide
– On models with eight hard disk drives, the top bays are numbered 0 through 7
(from right to left)
– On models with 16 hard disk drives, the top bays are numbered 0 through 7
(from right to left) and the bottom bays are 8 through 15 (from right to left)
0
Bay 0
1
Bay 1
2
Bay 2
3
Bay 3
4
Bay 4
5
Bay 5
6
Bay 6
7
Bay 7
http://www.lenovo.com/thinkserver.
a hard disk drive.
using drives with different speed ratings might cause all drives to operate at the
throughput of the slowest drive.
drive bays. However, you must turn off the server when you perform any steps
that involve installing or removing cables.
8
Bay 8
9
Bay 9
10
Bay 10
11
Bay 11
12
Bay 12
13
Bay 13
14
Bay 14
15
Bay 15