Chapter 4. Server Controls, Leds, And Power; Front View - Lenovo ThinkServer TD200x Installation And User Manual

Chapter 4. Server controls, LEDs, and power

This section describes the controls and light-emitting diodes (LEDs) and how to turn
the server on and off.

Front view

The following illustration shows the controls and LEDs on the front of the server.
Note: The front bezel door is not shown so that the drive bays are visible.
DVD drive activity LED: When this LED is lit, it indicates that the DVD drive is in
use.
System-power LED: When this LED is lit and not flashing, it indicates that the
server is turned on. When this LED is flashing, it indicates that the server is turned
off and still connected to an ac power source. When this LED is off, it indicates that
ac power is not present, or the power supply or the LED itself has failed. A
system-power LED is also on the rear of the server.
© Lenovo 2009. Portions © IBM Corp. 2009.
1
DVD drive activity LED (green)
2
System-power LED
3
Power-control button
4
Hard-disk drive activity LED
5
System-locator LED
6
System-information LED
7
System-error LED
8
USB 2
9
USB 1
10
DVD drive eject button
11
Hard disk drive status LED
(amber)
12
Hard disk drive activity LED
(green)
15