Lenovo ThinkServer TD200x Installation And User Manual page 162

(english) installation and user guide
Hide thumbs Also See for ThinkServer TD200x:
Table of Contents

Advertisement

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See the "Parts Listing" section in the Hardware Maintenance Manual to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
Description
00580A5
Mirror failover complete
0068002
CMOS battery cleared
2011000
PCI-X PERR
2011001
PCI-X SERR
2018001
PCI Express uncorrected or uncorrected
error
146
ThinkServer TD200x Types 3719, 3821, 3822, and 3823: Installation and User Guide
Action
Information only. Memory redundancy has been lost.
Check the event log for uncorrected DIMM failure
events.
1. Reseat the battery.
2. Clear the CMOS memory (see "System-board
switches and jumpers" on page 27).
3. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Battery
b. (Trained service technician only) System
board
1. Check the extender card LEDs.
2. Reseat all affected adapters and extender cards.
3. Update the PCI device firmware.
4. Remove the adapters from the extender card.
5. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Extender card
b. (Trained service technician only) System
board
1. Check the extender-card LEDs.
2. Reseat all affected adapters and extender cards.
3. Update the PCI device firmware.
4. Remove the adapters from the extender card.
5. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Extender card
b. (Trained service technician only) System
board
1. Check the extender-card LEDs.
2. Reseat all affected adapters and extender cards.
3. Update the PCI device firmware.
4. Remove both adapters from the extender card.
5. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Extender card
b. (Trained service technician only) System
board

Advertisement

Table of Contents
loading

Table of Contents