Setting Of Machine; Embroidery Hoop - Brother BES-963 Instruction Manual

Setting of Machine

Machine motions can be set.
Specify a type of an embroidery hoop set on the machine.
1.
2.
3.
4.
5.
6.

Embroidery Hoop

A type of a hoop to be selected varies depending on a type of a hoop (flat or cap)
selected by a switch on the operation panel.
When a flat hoop is selected
When a cap hoop is selected
All heads or every other head can be selected by pressing
All heads
Every other head (This mode is available only for flat hoop or sash frame.
Only the odd-numbered heads are operated.).
When operating every other head, refer to "Procedure for embroidering with flat
hoop/sash frame and every other head" (
feet from the even-numbered heads.
Press .
Select by pressing
Press .
Select a type of a hoop by pressing
Select either all heads or every other head by pressing
Press .
END
Modified setting is saved and the previous screen is displayed again.
BES-963BC • BES-1263BC
Tabular square hoop
Flat hoop
Sash frame
Semi-wide cap frame
Wide cap frame
Page 28), and remove the presser
.
.
All heads or every other head as
currently selected
Currently selected hoop
Chapter 5 Setting
.
.
95