Adjustment Of Thread Trimmer; Attaching The Fixed Knife; Checking The Movable Knife Position - Brother BES-963 Instruction Manual

Chapter 8 Adjustment

6. Adjustment of Thread Trimmer

6-1 Attaching the Fixed Knife

6-2 Checking the Movable Knife Position

e
w
t
r
156
q
w
q
Toward
this side
1mm
Triangle part of
movable knife
BES-963BC • BES-1263BC
Attach the fixed knife q to the pin w and
move it backward to the end of the slot,
then mount it there.
1. Turn the power switch on and wait until the
hoop home position detection is finished.
2. Press the stop switch in order to ensure
maximum safety during adjustment.
Adjust the movable knife position in this
state.
3. Loosen two bolts e that connect the thread
trimmer connecting rods C q and B w.
4. Tighten the two bolts e until the triangle
part of the movable knife r is projected by
1 mm from the fixed knife t.
* Precautions for tightening the two bolts e: