Chapter 5 Setting
2.
The timing of needle drop and hoop movement can be adjusted according to the
cloth thickness.
1.
2.
3.
4.
5.
118
Press the
button.
END
The changed settings are stored and the previous screen is displayed.
Feed Timing
The value can be designated between 95 and 125 degrees in 1-degree units.
The smaller values are suitable for thick material and the larger ones are suitable
for thin material. The standard value is 110 degrees.
Press
three times.
Select
with
Press
.
Designate the feed end angle with
Press the
button.
END
The changed settings are stored and the previous screen is displayed.
BES-963BC • BES-1263BC
.
.