Automatic Step-Back - Brother BES-963 Instruction Manual

4. Input sensitivity of the thread breakage sensor.
5. Press .
E N D
Modified setting is saved and the previous screen is displayed again.

Automatic Step-Back

The number of stitches to step back automatically in case of a thread breakage can
be set.
Setting can be done within the range of 0 ~ 10 stitches.
This function is previously set to 0 stitches upon shipments.
1. Press twice.
2. Select by pressing
3. Input the number of stitches to step back automatically by pressing ten
keys.
Pressing sets whether to execute an extra step-back by a sensitivity amount of the thread
breakage sensor in the automatic step-back mode.
When stepping back by a sensitivity
amount of the thread breakage sensor
When stepping back by preset number of
stitches
4. Press .
END
Modified setting is saved and the previous screen is displayed again.
BES-963BC • BES-1263BC
.
Total number of stitches to step back in
the automatic step-back mode
Chapter 5 Setting
93