Epson PowerLite 1705c User Manual page 52

Presenting Through a Wireless Network
52
4. Make sure is selected for the Connection mode. If not, use
Quick
the pointer button on the remote control to highlight
then press to select it.
Enter
5. If your network is using 802.11a, use the
the remote control to highlight
select it.
6. If your network card supports an SSID or ESSID name (see
page 55), highlight the
name:
Press the pointer button to select individual letters; then press
to input a character. To add a blank space or to navigate
Enter
backward and forward through the input text, highlight the
arrows and press
Enter
letters, highlight the option and press
highlight and press
Finish
Note that the ESSID is case-sensitive (if you enter the name in
uppercase on the projector, you must type it the same way on the
computer connecting to the projector).
7. When you're done making these settings, highlight the
button at the top of the screen, then press
and press
Complete
save your settings and return to the main EasyMP screen.
Now you're ready to set up your computer to project wirelessly. Go to
"Configuring the Network Settings for Windows" below, or "Setting
Up Your Mac for Ad Hoc Mode" on page 55.
, then press
802.11a
text box, press
ESSID
. To toggle symbol settings or capital
Enter
.
Enter
Enter
, then choose
Enter Yes
,
Quick
pointer button on
to
Enter
, and enter a
Enter
. When you're done,
Return
. Choose
Setup
and press to
Enter