Moving The Printer To Another Location; Shipping The Printer - Lexmark X264 Maintenance Manual

1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in the
TCP/IP section.
2
Click Device Status. The Device Status page appears, displaying a summary of supply levels.

Moving the printer to another location

Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.
CAUTION—POTENTIAL INJURY: Follow these guidelines to avoid personal injury or printer damage:
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
•
Disconnect all cords and cables from the printer before moving it.
•
Use the handholds located on both sides of the printer to lift it.
•
Make sure your fingers are not under the printer when you set it down.
•
Before setting up the printer, make sure there is adequate clearance around it. For more information, see the User's
•
Guide.
The printer and options can be safely moved to another location by following these precautions:
Any cart used to move the printer must be able to support its weight and have a large enough surface to support
•
the full footprint of the printer.
Keep the printer in an upright position.
•
Avoid severe jarring movements.
•

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.
Maintaining the printer
6